Our Story

This is the lamp that started everything.

Two divers, a manta ray drifting above them, light coming up through the water from below. I made it three years ago, and almost everything about it went wrong the first time.

The resin cured badly. The colors bled where they weren't supposed to. I poured a layer too thick and had to wait two extra days for it to set. Nobody tells you that resin punishes you for being impatient.

But when I finally switched the light on in a dark room, the water looked like it was moving. I've been chasing that moment in every lamp since.

How each lamp is made

Day 1–3

Design the piece

I sketch the scene first — composition, figure poses, colorway, and how the light will travel through the resin.

Day 3–4

Sculpt & paint

Figures get cleaned, primed and hand-painted under magnification. Eyes, seams, the details you only see up close.

Day 4–5

Build the scene

The diorama is built inside its mold — figures, terrain and lighting angles set before a single pour.

Day 5–8

Pour, cure & effects

Resin goes in layer by layer, with smoke and cloud effects worked in as I pour. Curing alone takes at least 3 days.

Day 8–10

Polish & light

I sand and polish every surface to glass clarity, fit the LED base, test it in the dark, then pack it.

Three promises we don't bend

  • Real photos, real reviews

    Every product photo is a real lamp, lit and shot in our studio. Every review is imported from our marketplace stores where these designs first sold.

  • If it breaks, we remake it

    Damaged in shipping or defective within 30 days — we send a free replacement and you keep the original. No return labels, no arguments.

  • A human answers you

    No bots, no ticket black holes. The people who reply to your emails sit a few meters from the pouring benches.

Find your world.

Shop all lamps

Resin can't be rushed. So I don't rush it.

Each lamp is poured in layers, and every layer has to fully cure before the next one goes in. Skip that and you get cloudiness, bubbles, or a piece that cracks months later. There's no shortcut that doesn't show.

The figures are hand-painted under magnification before they ever go in the mold — eyes, seams, the details you only notice when the light is on. Then the smoke and cloud effects are worked into the resin itself, not printed or glued on.

By the time a lamp is sanded, polished and wired, seven to ten days have passed. That's not a marketing number. It's just how long it takes to do it properly.

See more here